JET JPM-13CS / 708524 13" Planer/Molder with Enclosed Stand |
||||
|
||||
From the Manufacturer This JET planer/molder features a sturdy cast-iron table, mounted on four precision-ground steel columns for reduced vibration and smooth feeding. It has fully adjustable rubber-coated infeed and outfeed rollers, with a 1-1/2-horsepower motor, which is fully enclosed, fan cooled, and is located at the base of the machine to protect it from wood chips and dust. The two matched V-belts deliver full power to the three-knife cutterhead, while the two-speed gearbox provides smooth molding and fast planing. The high-quality tool steel of the three steel knife sets will provide a superior finish. Adding to the ease of operation, all cutters under 2 inches in width may be installed without removing the planing knives. It has a 13-inch-wide and 6-1/8-inch-thick planing and molding capability Amazon.com JET's planer/molder handles material up to 13 inches wide and up to 6 inches in height. The tool's 1-1/2-horse, 110-watt motor (you can easily rewire it to 230 watts) spins the three-knife cutterhead. Depending on the application, the machine runs 10 to 20 board feet per minute. The motor is fan-cooled and enclosed, too, so it doesn't overheat and stays protected from dust. The cast-iron table lends plenty of heft and contact surface, while the rubberized infeed and outfeed rollers support the work without marring it. As is standard with most planers, it comes with an incorporated dust chute--so it's simple to hook up to a dust collector and keep the shop clean. Four lockable casters (not standard) make it easy to maneuver the tool in a tight shop. For people working in home restoration, this tool is a godsend. To match new replacement molding with the existing material, copy the profile of the existing molding, get custom knives made, and cut your own replacement. A helpful video is included that walks you through the process of changing and setting blades. This is unquestionably a solid tool, ideal for home woodworkers looking to step up from a benchtop unit, and especially for remodelers and This Old House-type guys who need an good way to accurately match existing trim. --Jon Groebner |
||||
|
